Performance And Characteristics Of Aluminum Sheet And Aluminum Coil
The aluminum sheet is also known as aluminum coil. After cuttingthe sheet, we can get small aluminum coils. And it is convenient for customers to operate and use. The aluminum coil has the effect of anti-corrosion and anti-rust, in a word, it will gradually replace the iron sheet. And its cost is not high, practical and environmentally friendly.
Aluminum skin is one of the more commonly used products in aluminum materials. At present, we can produce 1050 series aluminum skin, 1060 series aluminum skin, 1070 series, 1080 series and other series. The product is beautiful and bright. Practical in the plumbing industry.
Features Of Aluminum Skin
1. The density of the aluminum skin is 2.71, and the thickness multiplied by 2.71. It’s equal to the weight per square, which is more cost-effective compared to the calculation.
2. The appearance of the aluminum skin is smooth, and the greasy dirt will not stick. At the same time, it also has a certain aesthetic effect. Long-term use is more anti-corrosion and rust-proof than iron, and it will not rust.
3. It is very soft during construction operation. Aluminum coils are easy to bent and wound, saving unnecessary manual effort.
Aluminum Skin Technical Requirements
1. The gap is required to be tight: the multi-layer insulation must be pressed, and the distance of the pressed seam shall not be less than 300mm. The insulation material is bound firmly. And it’s close to the wall of the equipment or pipeline, and the surface of the insulation layer is smooth and beautiful.
2. When the pipeline insulation aluminum coil is constructed by the binding method, at least two galvanized lead wires or bands are bound for each piece of the curved tile. And the distance between them shall not be greater than 500mm.
3. The longitudinal joint position of the pipeline shall not within 55° of the vertical centerline of the pipeline.
4. The seam width of thermal insulation products is generally not more than 6mm. And the construction should pay attention to the wrong seam.
Features Of Thermal Insulation Aluminum Coil
1. The aluminum coil is light in weight. Calculated to the price per square, steel and aluminum are almost equal.
2. The aluminum coil is easy to process and form. And the construction is convenient and fast, which will greatly reduce the labor intensity of the construction personnel.
3. The aluminum coil is beautiful, and the outer decoration is made of aluminum skin. The bright visual effect is very good, and it is bright and stylish after wrapping the pipeline!
4. Aluminum coils have a long service life. Because aluminum has corrosion resistance, it will generally not corrode for more than 20 years.
5. The recycling value of aluminum coils is high. The iron sheets will corrode and rot after a few years of use, and have almost no recycling value. However, because of the corrosion resistance of aluminum coils, the value of the furnace after recycling is much higher.
6. Aluminum coils are very suitable for thermal insulation projects such as oil refineries, power plants, chemical plants, etc.!
Summarize
Insulation aluminum coil is actually a thin plate of aluminum. Since the iron sheet has no anti-rust effect, the thermal insulation aluminum sheet in China has completely replaced the iron sheet. Thermal insulation aluminum skin is one of the more commonly used products in aluminum sheet and strip materials.
